Concrete pumps
Three trailer mounted pumps and a truck mounted series. Diesel prime movers from 65 HP to 169 HP, output from 50 to 71 cubic metres an hour, and reach from 450 m to 800 m.
The models
Three pumps, and a truck mounted series.
Diesel or electric prime movers, a 200 mm pumping cylinder across the range, and hydraulic pressure from 300 to 350 bar.
Entry
01 of 04
CPH 50
The entry pump in the range, for building sites and smaller infrastructure work where the line stays inside 450 m.
Why this model
✓
Diesel prime mover, 65 HP at 2,300 RPM
✓
Output 50 m3/hr rod side, 34 m3/hr head side
✓
Maximum length and height 450 m / 120 m
✓
500 litre hopper, 300 bar hydraulic pressure
Specification chart
Prime mover diesel. Power 65 HP. Speed 2,300 RPM. Output 50 m3/hr rod side, 34 m3/hr head side. Strokes per minute 27 rod side, 18 head side. Concrete pressure 61 bar rod side, 91 bar head side. Pumping cylinder 200 mm diameter, 1,000 mm stroke. Hydraulic pressure 300 bar. Hopper capacity 500 litres. Maximum length and height 450 m / 120 m.
Enquire about the CPH 50
Mid range
02 of 04
CPH 70
The mid range pump. A longer cylinder stroke and higher hydraulic pressure take output to 71 cubic metres an hour and reach to 600 m.
Why this model
✓
Diesel prime mover, 110 HP at 2,400 RPM
✓
Output 71 m3/hr rod side, 48 m3/hr head side
✓
Maximum length and height 600 m / 150 m
✓
600 litre hopper, 350 bar hydraulic pressure
Specification chart
Prime mover diesel. Power 110 HP. Speed 2,400 RPM. Output 71 m3/hr rod side, 48 m3/hr head side. Strokes per minute 27 rod side, 18 head side. Concrete pressure 71 bar rod side, 106 bar head side. Pumping cylinder 200 mm diameter, 1,400 mm stroke. Hydraulic pressure 350 bar. Hopper capacity 600 litres. Maximum length and height 600 m / 150 m.
Enquire about the CPH 70
High reach
03 of 04
CPH 70 HRX
The high reach pump. Same output as the CPH 70, but it pushes the line to 800 m horizontal and 200 m vertical for high rise and long distance placement.
Why this model
✓
Diesel prime mover, 169 HP at 2,000 RPM
✓
Output 71 m3/hr rod side, 48 m3/hr head side
✓
Maximum length and height 800 m / 200 m, the longest reach in the range
✓
600 litre hopper, 350 bar hydraulic pressure
Specification chart
Prime mover diesel. Power 169 HP. Speed 2,000 RPM. Output 71 m3/hr rod side, 48 m3/hr head side. Strokes per minute 27 rod side, 18 head side. Concrete pressure 71 bar rod side, 106 bar head side. Pumping cylinder 200 mm diameter, 1,400 mm stroke. Hydraulic pressure 350 bar. Hopper capacity 600 litres. Maximum length and height 800 m / 200 m.
Enquire about the CPH 70 HRX
Truck mounted
04 of 04
LIMO Series
The truck mounted configuration, carrying the CPH 50, CPH 70 or CPH 70 HRX unit on a chassis for sites where the pump has to move with the pour.
Why this model
✓
Carries the CPH 50, CPH 70 or CPH 70 HRX pump unit
✓
Truck mounted, so the pump moves with the pour
✓
Output 50 to 71 m3/hr depending on the unit fitted
✓
Reach from 450 m to 800 m depending on the unit fitted
Specification chart
CPH 50: 65 HP, 50 m3/hr, 450 m / 120 m. CPH 70: 110 HP, 71 m3/hr, 600 m / 150 m. CPH 70 HRX: 169 HP, 71 m3/hr, 800 m / 200 m. All three run a 200 mm pumping cylinder on a diesel or electric prime mover.
Enquire about the LIMO Series
Comparison
The range, side by side.
Model
Output and maximum reach
CPH 50
50 m3/hr, 450 m / 120 m
71 m3/hr, 600 m / 150 m
CPH 70 HRX
71 m3/hr, 800 m / 200 m
LIMO Series
Truck mounted, 50 to 71 m3/hr
